Heavy duty anticorrosive (FBE) powder coating

Product series
---standard curing and fast curing products
---the powder coating can be provided for the heavy corrosion protection of single layer, double layer and three layer pipeline

---can provide anti-corrosion powder coating

Product characteristics
---designed for pipeline corrosion protection, with excellent physical properties and chemical resistance

---with excellent resistance to cathodic stripping

---single, double and three layer of heavy anticorrosive coating system

---cure reaction rate is fast, the production efficiency is high

Product Detail

Conditions of use
---high voltage electrostatic spraying or friction charged spraying (thermal spraying)
---coating thickness: in the use of 150-600 microns, the proposed film thickness of 250-350 microns
---average coverage: 4-5 square meters / kg, film thickness of 250 microns (to 100% usage)
---baking curing conditions: recommended 230 degrees C/3 minutes, but also according to the user needs to design

Physical property
---specific gravity: 1.4-1.6g/cm3 (due to different formulations and colors)
---particle size distribution: the use of different types and different standards for the average particle size of 40-45 microns, less than 10 micron powder <10%, greater than 90 microns powder <0.5%

Film performance ---all tests were performed using 3mm cold rolled steel plate in thick oil and rust, the film thickness of 250-350 microns

Product packaging
---carton packaging, lined with single layer thick film polyvinyl chloride plastic bags, net weight of 20 or 25Kg

Storage condition
---pure epoxy powder coating should be in 30 degrees centigrade, drying, ventilation of indoor storage, while avoiding direct sunlight, such as stored in the air-conditioning room, the use of powder should be at room temperature or with spray equipment the same (temperature) storage, avoid damp. Under the above conditions, the powder can be stored stably for 6 months. Note: for low temperature curing type and gloss in 40% (60 degrees) below the powder, storage temperature is less than 30°C

Health and safety
---product raw material does not contain toxic substances, are in line with ROHS, reach, baking free of toxic gases produced, but it should be avoided in the use of inhalation of dust in the process, the operator should wear a dust mask, and minimize the long-term exposure of skin and powder coating, attached to the skin of paint, can be washed with soap