Furniture powder coatings

Product series
---standard curing and low temperature curing products;
---can be made of a variety of gloss and color products: specific gloss color to the user;
---can be made into a variety of special surface appearance products: such as sand lines, continuous lines, wrinkles, metal effects, etc.

Product characteristics
---with excellent wear resistance
---with excellent hardness
---with excellent flexibility
---corner coverage rate is good
--- high antibacterial resistance and good performance

Product Detail

Product use

---mainly used for high-grade furniture, outdoor leisure products, the shelves of the occasion

Conditions of use
---coating thickness: in the use of 40-100 microns, the proposed film thickness of 60-80 microns
---average coverage: 10-12 square meters / kg, film thickness of 60-80 microns (to 100% usage)
---baking curing conditions: recommended 200 degrees C/10 minutes, but also according to the user needs to design: 180 degrees C/15 minutes, 160 degrees C/20 minutes, 140 degrees C/30 minutes.

Physical property
---specific gravity: 1.5-1.8g/cm3 (due to different formulations and colors)

---particle size distribution: the use of different types and different standards for the average particle size of 35-40 microns, less than 10 micron powder <10%, greater than 90 microns powder <0.5%.

Film performance --- all tests were performed using 0.8mm cold rolled steel plate in thick oil and rust, the film thickness of 60-100 microns.

Product packaging
---carton packing, lined with single layer thick film polyvinyl chloride plastic bag, net weight 20kg or 25kg per carton

Storage condition
---the product should be stored in a dry, ventilated room at 35 degrees C, while avoiding direct sunlight. As in the air conditioning room storage, before use to powder at room temperature or with the same spraying equipment (temperature) storage, avoid damp. Under the above conditions, the powder can be stored stably for 12 months.

Health and safety
---product raw material does not contain toxic substances, are in line with RoHS and reach, the baking free of toxic gases produced, but it should be avoided in the use of inhalation of dust in the process, the operator should wear a dust mask, and minimize the long-term exposure of skin and powder coating, attached to the skin of paint, can be washed with soap.